iFlight BLITZ H7 Pro FC & E80 4-IN-1 80A ESC Combo (6S-12S, CNC Cover Optional, ArduPilot/BF/INAV Supported)
Overview
The iFlight BLITZ H7 Pro Combo is a high-performance flight controller and ESC solution designed for demanding long-range and heavy-lift FPV drones. With support for 4S to 12S Lipo. an STM32H743 MCU. and up to 80A continuous current. it delivers professional-grade performance and durability. Users can choose from two configuration options:
Combo 1: H7 Pro FC + 1× E80 ESC
Combo 2: H7 Pro FC + 2× E80 ESCs (for redundant/power-split builds)
The ESC also offers an optional CNC aluminum heat sink cover for advanced thermal protection and EMI shielding. especially for high-amperage builds.
Flight Controller: BLITZ H7 Pro
Key Features
12S Ready: Supports 14.8–50.4V (4S–12S) input
Strong Core: STM32H743 processor. 7 UARTs. SD card blackbox
Firmware Support: Compatible with Betaflight. INAV. and ArduPilot
Shielded Design: Dual-sided EMI shielding. detachable for easy TF card access
Flexible Connectivity: GH1.25 connectors. UART mapping for VTX. GPS. Receiver. ESC telemetry
Specifications
| Parameter | Value |
|---|---|
| MCU | STM32H743 |
| Gyro | ICM42688 |
| Barometer | DPS310 |
| OSD | AT7456E |
| Blackbox | SD Card |
| Input Voltage | 14.8V–50.4V (4S–12S) |
| BEC | 5V 3A. 12V 2.5A |
| Mounting | 35×35mm (Φ4) |
| Dimensions | 42×42×11.3mm |
| Weight | 20g |
| Firmware Target | BF: IFLIGHT_BLITZ_H7_PRO / INAV / ArduPilot |
Suggested Wiring
UART1: VTX (HD/Analog)
UART2: Receiver
UART4: GPS
UART5: ESC Telemetry
8× DShot/PWM Outputs
2× I2C for Compass Modules
ESC: BLITZ E80 4-IN-1
Key Features
80A Continuous / 100A Burst
4OZ PCB with 8-layer copper design
Automotive-grade MOSFET (PSMN1R0-40YLD)
TI synchronous rectifier buck converter. 100V withstand
48MHz G071 MCU
BLHeli_32 firmware with telemetry and current sensor support
Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 2–8S Lipo |
| Continuous Current | 80A |
| Burst Current | 100A |
| MCU | G071 |
| Firmware | BLHeli_32 |
| Telemetry | Supported |
| Current Sensor | Yes |
| Dimensions | 35×42mm |
| Mounting | 35×35mm / Φ3mm |
| Weight | 65g ±10g |
| Protocol | DShot150/300/600. MultiShot. OneShot |
CNC Aluminum Cover (Optional)
You may choose between:
With CNC Alum Cover: Provides heat dissipation and mechanical protection
Without CNC Cover: Lightweight for racing or optimized cooling
⚠ Note: If using the CNC aluminum version. please use the "BLHeliSuite32Test" software from our Downloads section for parameter adjustments. as BLHeli32 public config tool is restricted.
Combo Options
Combo 1: 1× BLITZ H7 Pro FC + 1× E80 4-IN-1 ESC
Combo 2: 1× BLITZ H7 Pro FC + 2× E80 4-IN-1 ESCs (e.g.. for octocopters or redundancy)
Packing List
1× BLITZ H7 Pro Flight Controller
1× E80 4-IN-1 ESC (Combo 1) / 2× E80 4-IN-1 ESCs (Combo 2)
1× 50V 470uF Capacitor Plate
2× 50V 1000uF Capacitors
1× Wiring Set
1× USB Adapter Board
| CNC |
With CNC Alum Cover, Without CNC Alum Cover |
|---|---|
| Optional |
Combo 1 (1*H7 pro FC+1*E80 4in1 ESC), Combo 2 (1*H7 pro FC+2*E80 4in1 ESC) |