Airdrop System for DJI Mavic 3/3 Classic/2/AIR 2/2S Drone Thrower Fishing Bait Wedding Ring Gift Deliver Life Rescue Kits

Note: This product is a quick release product. Use a photoresistor switch (no photosensitive cable). Before purchasing. please pay attention to the drone model to which the variant applies. If the purchase is wrong. Nothing to do with the seller.

Feature:

1. Suitable for Mavic 3 drone.
2. It can be delivered remotely for advertising. throwing bait. throwing gifts. delivering meals. delivering wedding rings. etc.
3. USB charging. quick release. one-key remote control.
4. Lightweight and safe. it will neither increase the burden of the drone nor damage the drone. and is easy to install and disassemble.
5. The height of the front landing gear is increased by 3.7cm. and the height of the rear landing gear is increased by 3cm. which can effectively prevent ground debris from contaminating the body or damaging the gimbal and body during take-off and landing.

Note: The "red light is always on" during charging. the "green light is always on" when fully charged. the parabola will flash a few red lights when it is opened for normal use. and then the "red light is always on";

Description:
Material: ABS.
Applicable models: for Mavic 3/3 Classic
Color: Dark grey.
Net weight: 79.2g
Product size: 9.7*8.5*5.3cm

Specifications
Maximum load weight: 500g.
Built-in battery capacity 150mAh.
Charging interface: Micro-USB.
Charging time: 90 minutes.
Charge once to open about 300 times.

Packing list:
1 pcs payload release kits
1 set Landing gear
1 pcs USB charging cable
1 hanging wire hook .

Note:
1.Does not include the Drones.
2.Transition: 1cm=10mm=0.39inch.
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering.
4.Due to the difference between different monitors. the picture may not reflect the actual color of the item.please make sure you do not mind before ordering. Thank you!
5. Make sure you have enough power before using.

for DJI Mavic 2 Pro/Zoom Feature:

1. Suitable for Mavic 2 Pro/Zoom drones;
2. It can be delivered remotely. used for advertising. bait. gifts. meal delivery. wedding rings. etc.;
3. USB charging. quick release. one-key remote control;
4. The landing gear is installed at the bottom. which can effectively raise the drone by 3.2cm. which can prevent the sundries at the bottom of the aircraft from contaminating the fuselage or damaging the gimbal during take-off and landing;
5. Lightweight and safe. does not affect the flight of the drone. and is easy to install and disassemble.

Description:
Material: ABS.
Applicable models: for Mavic 2 Pro &Zoom.
color:Gray.
Net weight: 70g.
Product size: 10.2*8.5*6.6cm

Packing list:
1pcs Airdropper
1set Landing gear
1pcs Airdropper charging cable
1pcs Steel ring

Note:
1.Does not include Drone.
2.Transition: 1cm=10mm=0.39inch.
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering.
4.Due to the difference between different monitors. the picture may not reflect the actual color of the item.please make sure you do not mind before ordering. Thank you!

Applicable to DJI Mavic 3. Mavic 3 Classic. Mavic 2. and Mavic Air 2/Air 2S drones. this Airdrop System enables remote delivery of gifts. including bait for fishing. wedding rings. and other small items.

This lightweight Airdrop System weighs approximately 70 grams. making it safe and convenient to use. Designed to seamlessly integrate with your DJI Mavic drone's fuselage. it enables you to deliver small gifts. such as tokens or mementos. through aerial means.

Enjoy a seamless installation experience with this non-invasive Airdrop System. Once installed. it won't obstruct the functionality of your DJI Mavic drone's visual positioning sensor or infrared sensor. ensuring uninterrupted use.

The Airdrop System's improved landing capabilities increase the effective landing distance by 32mm. allowing for safe and stable touchdowns even on uneven terrain. This design feature ensures the integrity of your DJI Mavic drone's fuselage remains protected during takeoff and landing operations.

The Airdrop System features a unique landing gear design. where the front landing gear has no directional markings. while the rear landing gear is clearly labeled as 'L' or 'R'. This allows for easy installation and secure fastening of the back landing gear. which can be opened and closed as needed.

Key Specifications for DJI Mavic 2 Pro/Zoom: Maximum Load Capacity: approximately 500g. Remote Control Distance: signal distance not specified. Packing List: includes SYSTEM REMOTE Antenna (compatible with ICtt4). does not include weights or throttle.

Feature:

1. Suitable for AIR 2S/AIR 2 drones.
2. It can be delivered remotely for advertising. throwing bait. throwing gifts. delivering meals. delivering wedding rings. etc.
3. Lightweight and safe. it will neither increase the burden of the drone nor damage the drone. and is easy to install and disassemble.
4. Install the landing gear at the bottom without affecting the propeller and sensor.
5. The height of the front landing gear is increased by 31mm. and the height of the rear landing gear is increased by 28mm. which can prevent the ground debris from contaminating the fuselage or damaging the gimbal when taking off and landing the aircraft. and it can still take off and land on uneven ground.

Description:
Material: ABS.
Applicable models: for AIR 2S.AIR 2.
Color:Gray.
Net weight: 62.9g
Package weight: 125g
Product size: 9.2*8*2.8cm (thrower). 6.1*2.1*1.2cm (rear landing gear). 5*1.7*1.5cm (front landing gear)
Package size: 12*10*7cm

Specifications
Maximum load: 500 grams
Built-in battery capacity: 150mAh
Standby time: about 12 hours
Can be turned on with one charge: about 200 times
Self-charging time: 1 hour

Packing list:
1pcs Thrower
1set Landing gear
1pcs Ring
1pcs Foot pad
1hanging wire hook

Note:
1. Does not include the Drone.
2. Before use. please fully charge it.
3. Please do not hang or throw objects that are too large or heavy. so as not to cause the instability of the drone and affect the flight safety of the drone.
4. Please check the working status of the drone and the dropper before throwing. Please use the dropper in a safe. open. and interference-free place. do not throw objects over crowds. cars. buildings. etc. to avoid personal injury and property.
5.Transition: 1cm=10mm=0.39inch.
6.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering.
7.Due to the difference between different monitors. the picture may not reflect the actual color of the item.please make sure you do not mind before ordering. Thank you!

The Airdrop System for DJI Mavic 3/3 Classic. Mavic 2/AIR 2/2S drones enables remote delivery capabilities. perfect for various applications such as advertising. fishing bait tossing. gift giving. meal delivery. and even wedding ring presentation.

The Airdrop System Thrower measures approximately 6.1 x 2.1 x 1.2 cm in size (excluding rear landing gear). and its compact design weighs only about 125g. making it perfect for use with DJI Mavic Air 2/2S drones.

The Airdrop System is specifically designed for use with DJI Mavic Air 2S drones. It features a quick-release mechanism and can be controlled via the drone's remote with just one button. providing effortless operation.

The Airdrop System for DJI Mavic Air 2S drones is designed to be lightweight. safe. and stable. allowing for remote delivery capabilities ideal for various applications such as advertising. fishing bait throwing. and delivering wedding rings.

unobstructed Installing a thrower will not block the drone visual positioning sensor .

The Airdrop System features a buckle switch indicator. charging port with charging indicator. and swing arm. Key specifications include:• Maximum load capacity: 500g• Built-in battery capacity: 1500mAh• Standby time: approximately 12 hours• Self-charging time: hours• One charge can open the thrower about 200 times

The Airdrop System features raised landing gear. which increases the front landing gear height by 31mm and rear landing gear height by 28mm. This design upgrade helps prevent debris from contaminating the fuselage while still allowing for takeoff and landing on uneven ground.

The Airdrop System's landing gear design allows for easy disassembly and reassembly. Simply snap the thrower into place and secure it with the top buckle. which completes the installation process at the drone's bottom centerline.

To use the Airdrop System with your DJI Mavic drone. open the DJI Fly app and navigate to the remote control settings menu. From there. toggle off the Safety Auxiliary LED and click the settings button in the top-right corner to complete the setup.