CUAV XB Pro Radio Telemetry - 250mw 902~928MHz 6.5KM/15.5KM Distance Wireless PRO 900HP Integrates Signals Data Transmitter
CUAV XB Pro Radio Telemetry
KeyPoint:
- 6.5km Transmission Distance
- 200kbps Transmission Rate
- Switchable Air Data Transmission Rate
- Integrated RSSI Signal Strength Detection
Summary
The XB Pro Radio is a high-performance wireless data communication module designed for UAV networking equipment. It provides users with reliable wireless connections and offers a general-purpose interface to extend the data transmission range. Using DigiMesh networking technology. it supports a transmission distance of up to 28 miles (in ideal conditions). with a maximum transmission rate of 200kbps. providing stable and extended communication.
Specifications
| Component | Details |
|---|---|
| Frequency Band | 902 ~ 928 MHz |
| RF Chip | ADF7023 Receiver. Cortex-X3 EFM32G230@28MHz |
| Processor | Freescale MC9S08QE32 |
| Wireless Option | wire.U.FL and RPSMSA |
| Data Rate | 10kbps/200kbps (Selectable based on distance and environment) |
| Indoor/Urban Range | 10kbps: up to 2000 ft (610m); 200kbps: up to 1000 ft |
| Outdoor/Line-of-Sight Range | 10kbps: up to 15.5 miles (25km); 200kbps: up to 5 miles (8km) |
| Maximum Transmit Power | 24dBm (250mW) Software Adjustable |
| Receiver Sensitivity | -101dBm@200kbps; -110dBm@10kbps |
| Data Interface | UART(3V) SPI |
| GPIO | 15 Configurable IOs. 2 PWM Outputs. 10-bit ADC Inputs |
| Networking Structure | DigiMesh. point-to-multipoint. peer-to-peer networking |
| Modulation | FHSS (frequency hopping spread spectrum) |
| Programming | Yes |
| Memory | 32kb FLASH/2kb RAM |
| CPU Clock Speed | 50MHz |
| Power Supply Voltage | 4 ~ 7V |
| Transmit Current | 229mA |
| Receive Current | 44mA |
| Sleep Current | 3uA |
| Regulatory Approvals | FCC (USA): MCQ-XB900HP. IC (Canada): 1846A-XB900HP. C-tick (Australia/NZ). Anatel (Brazil). IDA (Singapore) |
CUAV XB Pro Radio Telemetry Introduction:
The CUAV XB Radio PRO wireless data communication module provides best-in-class wireless connectivity for drones or IoT devices. They use the DigiMesh network protocol. have intensive network operations and support for sleep routers. and can also use proprietary point-to-multipoint configurations. These modules support RF line-of-sight ranges up to 28 miles (with high gain antennas) and data rates up to 200 Kbps. making them ideal for extended-range applications that require increased data throughput.
The CUAV XB Radio PRO does not require programming and can be easily configured using Digi's free XCTU software or through a simplified set of AT commands.
The built-in Digi XBee module has been pre-certified in multiple countries. further reducing development costs and shortening time to market.
The CUAV XB Radio PRO module is easy to use. shares a common hardware serial port. and offers a variety of different protocols so that users can integrate with your drone or device with minimal development time and risk.
Product Features:
Double-ended switching
CUAV XB Radio PRO has built-in TTL and USB ports. seamless switching between air and ground. and greater flexibility to reduce the cost of use.
Integrated RSSI output
CUAV XB Radio PRO integrates the signal strength output and can be directly connected to the drone controller. allowing the user to obtain the current signal strength in real time to determine the risk of loss.
Specifications:
Size (mm):
30*55*9mm
weight: 39
package weight:300g
Package including:
- 2 x Data Transmission Module with shell
- 2x Antenna
- 3 x Connection cable: : pixhack. pixhawk. RSSI
- 1 x USB data cable
CUAV XB Pro Radio Telemetry Features:
1 --No programming required. you can easily configure it using Gigi's free XCTU software or with a simplified set of AT commands.
2 --Best-in-class wireless link with dense network operation and support for sleep routers.
3 --Dual-ended switching with built-in TTL and USB ports for seamless switching between air and ground ends.
4 --Integrated RSSI output. signal strength output. to determine the risk of missing link
This combo kit includes an XBee radio. a Pixhawk flight controller with data cables (USB and Pixhawk). an RSSI (Radio Signal Strength Indicator) cable. a standard USB cable. two antennas. and a set of VS/X7 series autopilot cables.
Thank you very much for your usual good quality and sturdy products! Order date: June 29. 2021. 05:19. Shipping method: AliExpress Standard Shipping. Estimated arrival date: July 1. 2021. 04:17 AM. Product details: Ru Color: Black; TR Color: VSPlus Carrier Board Solid. Reliable store.