The FRM302 is a reliable. low latency. long-range 2.4GHz RF module with a range of up to 50km（use with the flysky maple antenna） and designed for UAV applications.

Features:
- The FRM302 is Flysky's newest generation of 2.4GHz RF modules for UAV. aerial photography. and competition. With more power than ever. the FRM302 has a range of up to 50km（use with the flysky maple antenna）.
- High gain RF components. coupled with Flysky's latest generation of an intelligent wireless protocol. AFHDS3. which has a built-in chip with higher sensitivity and a higher gain. enable the module to cut through interference easily while maintaining high transmission rates. especially when compared to 900MHz counterparts.
- The FRM302 achieves high-speed data transmission (2.4GHz). low latency (<10ms. UART). precise response even with weak signal strength. and active evasion of co-channel interference in long-distance and multi-obstacle use cases.
- Supports a wide range of input voltages (5-28V) and different battery connectors; RGB LED indicator ring around the button (Blue. Yellow. Green. Red); Change FRM302 settings with the touch of a button.
- Built-in fan. automatic cooling adjustment function. if the chip temperature rise above 45℃ the built-in fan will start. it will stop again once the temperature drops below 45℃.
- The FTr16s FPV receiver. the FTr10. and all other AFHDS3 receivers are compatible. Support PPM and serial communication with failsafe also available in PPM mode.

Specification:
Product Model: FRM302
Built for: PL18. FS-TH9X. NV14
Wireless frequency: 2.4GHz
Transmission power: <30dBm
Wireless protocol: AFHDS 3
Range: > 35km
Delay: <10ms (UART mode)
Antenna type: external single antenna
Power: 5-28V
Data port: PPM / UART
Temperature range: -10 ℃ ~+ 60 ℃
Humidity range: 20% -95%
Online Update: Yes
Size: 64.2 * 48.5 * 33mm
Weight: 73.3g

Package Information:
Package size: 141*98*40mm
Package Weight: 130g
Package list: 1 x FRM302 Module
 
Notice:
* DISCLAIMER: THE FACTORY PRESET TRANSMISSION POWER OF THIS PRODUCT IS < 20DBM. PLEASE ADJUST IT IN ACCORDANCE YOUR LOCAL LAWS. THE CONSEQUENCES OF DAMAGE CAUSED BY IMPROPER ADJUSTMENTS SHALL BE BORNE BY THE USER.
* THE ENVIRONMENT MAY CAUSE VARIATIONS IN PERFORMANCE.

FRM3O2 is Built for PL18. FS-thgx; NV14 transmitters. and other controllers that can be connected to external PPM RF modules . *AII AFHDS3 receivers support FRM302 OKR Palndin 2l= FRM3002 MoDULE Achr anf

If the chip temperature exceeds 45°C. the built-in fan will automatically activate to cool it down. Once the temperature drops below 45°C. the fan will stop. Additionally. when the device is in sleep mode. it will switch between internal and external power sources.

FRM302 Compatibility Comparison Table: This transmitter module is compatible with Flysky PL18. FS-TH9X. and NV14 transmitters via external FS receiver. JR slot. PPM signal. OpenTX firmware. and Telemetry. Note that some functions may require an external power supply to function properly.