Summary

The GEPRC GPS series product line has been fully upgraded. The GEP-M1025 series of GPS products based on  M10050 chip and using 25*25mm antenna are now launched.

The GEP-M1025 series GPS positioning module uses  M10 chip solution and supports GPS+BDS+Galileo+QZSS+SBAS joint positioning. up to 32 satellites. 25*25mm ceramic antenna provides better reception capabilities. Built-in Flash chip and Farad capacitor can save configuration parameters and quickly hot start.

Optional QMC5883L/IST8310 magnetometer and DPS310/MS5611 barometer. A variety of matching solutions provide accurate azimuth pointing and sensitive altitude change data. It can meet the needs of most FPV quadcopters . multi-rotor. fixed wing and other model products.

Note: The direction of the magnetometer in INAV should be set to QMC5883: CW 0° flip. IST8310: CW 90° flip.

Feature

1.  M10 series chip

2. GPS+BDS+Galileo+QZSS+SBAS joint positioning

3. Fast positioning speed.Up to 32 satellites

4. Stable connection quality

5. 25*25mm antenna size. better signal receiving performance

6. Built-in Flash chip and Farad capacitor

7. Onboard indicator light. easy to use

8. Optional integrated magnetometer+barometer. more collocation scheme

Includes

1 x GPS module

1 x terminal wire

1 x GPS module instruction manual

1 x GEPRC sticker

1 x heat shrink tubing

GEPRG GEP-M1025-DQ DC GEPRC GEPRC ALRTVG PWR PPS GEP - M1025 R INC R alRTVG GEPRP PWRpPS PPS PWRE GEP M1O chip 25*25mm antenna Joint positioning IST8310/QMC5883L DPS3IO/MS5611 Mag Barossa/M1O Chip 25*75mm antenna

This GPS module features a 10th-generation M10050 chip that enables multi-satellite joint positioning via GPS. BDS. Galileo. QZSS. and SBAS systems.

This GPS module is easy to use and features plug-and-play functionality. It supports multiple combinations of satellite systems. including 7 satellites for positioning. 2 satellites for magnetometer readings. and 3 satellites for barometric pressure measurements. Additionally. it features a capacitor and Farad component for accurate performance in FPV drone applications.

This GPS module features advanced sensors. including a QMC5883L magnetometer and an IST8310 or MS5611 barometer for precise measurements. With these options. users have more flexibility and customization possibilities.

The interface definition for this GPS module includes:* Ground (GND) and +5V power connections* SV (supply voltage) connected to the FC (flight control) power supply* RX port connected to the FC TX port* SDA and SCL interfaces connected to the FC SDA and SCL respectivelyNote that there is also a Non-Functional (NC) pin present only on the GEP-M1025 model. but no connection is required.

This GPS module features the following output protocol characteristics:* Output protocol: UART (with Baro and Mag data)* Baud rate: 115200bps* Output frequency: 10Hz* Speed accuracy: ±0.05m/s* Horizontal positioning accuracy: 2D ACCISm (weather) with an accuracy of insert accuracy value* Timing accuracy: 30ns* Receiver sensitivity: + Trace: -162dBm + Capture: -160dBm* Dynamic characteristics: + Maximum height: 5000m + Maximum speed: 500m/s* Size: 29x insert size valueNote that the maximum acceleration is also 46g.