JHEMCU VTX20-600 Transmitter - 5.8G 40CH PitMode 25mW 100mW 200mW 400mW 600mW Adjustable VTX 7-26V 20X20mm for FPV RC Racing Drone

JHEMCU has a perfect VTX to add to your next build. The 20x20 mounting holes make it able to be mounted in most frames. With the 600mw output and the IRC Tramp control. this VTX has just about everything you could need.

Description:
Brand: JHEMCU
Model: VTX20-600
Input voltage: 7-26V
Output voltage and current: 5V 1A
Number of channels: 40CH
Transmitting power: PIT/25/100/200/400/600mW
Interface: MMCX
Control protocol: VTX IRC Tram
Dimensions: 27x27mm
Installation hole distance: 20x20mm
Installation aperture: 3mm
Weight: 3g

Instructions:

The image transmission supports the IRC Tram protocol to adjust the channel and power of the image transmission through the OSD and remote control. and also supports the switch of the power and channel through the button of the image transmission.

Short press; select CH1-8 cyclically. and the number of times the green light flashes represents the number of CHs.

Long press for 3 seconds; after long press for 3 seconds. the blue light will light up. continue to press and hold to cycle to select the frequency band FR A-B-E-F-R. Corresponding to the blue light flashes 1. 2. 3. 4. 5 times.

Long press for 6 seconds; after long press for 6 seconds. the red light will light up. continue to press and hold. cycle to select the power 25-100-200-400-600mW. corresponding to the red light flashes 1 time. 2 times. 3 times. 4 times. 5 times .

Package Included: Optional number
VTX20-600 VTX
Antenna (optional)
Cable wire

When flight controller OSD is not required Video Out GND Ignore Thesel GND Power Flighty GND Video FR Controller IcG GND GND CH INPUT !-RRd DciN 1 3 E88 qd Controller TX For VTX JSON Table please check https IIgithubcom/jhemcu/FC-ESC-Firmware/tree/main/VTX2O-600 .