TODAY DEAL SALE OFF 10%. END IN %-D day%!D %H:%M:%S. HURRY UP!!!

MATEK Mateksys FLIGHT CONTROLLER F405-HDTE

$142.72 $95.15
Add to Wishlist
Ask a Question
SKU: 1005005084892040-China
Availability: In Stock Pre order Out of stock
Categories: Flight Controller
Description

MATEK Mateksys FLIGHT CONTROLLER F405-HDTE SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Recommend Age: 12+y.14+y.6-12y

Origin: Mainland China

Material: Composite Material

Brand Name: MATEKSYS


FLIGHT CONTROLLER F405-HDTE

STM32F405RGT6. ICM42688-P. SPL06. OSD. 6x UARTs. 1x I2C. 12x PWM. Dual BEC. 3~12S LiPo input

a 916V BEC for DJI OSD or analog VTX.MCU: STM32F405RGT6 OSD: AT7456EMATEKSYS Flight Controller F4O5-HDTE As 9X8 9X

MATEKSYS Flight Controller F4O5-HDTE As 9X8 9XL XiA Sxa MCU: STM3ZFAOSRGT6 X8 XII031 23 IMU: ICM42688-P 5 Barometer: SPLO6-001 @2

8motors+3servos in INAV/BF multirotor mixera 916V BEC for DJI OSD or analog VTX.

Features

  • STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight

  • InvenSense the 3rd generation IMU ICM42688-P

  • 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.

  • 8motors+3servos in INAV/BF multirotor mixer.

  • 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC

  • 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)

  • USB pin breakout for connecting to external USB adapter.

Specifications

  • MCU: STM32F405RGT6

  • IMU: ICM42688-P

  • OSD: AT7456E. DJI OSD

  • Baro: SPL06-001 (I2C)

  • Blackbox: 16M-byte Flash memory

  • 6x UARTs.  1x Softserial_Tx option

  • 12x PWM outputs (8x Dshot)

  • 1x I2C

  • 4x ADC (VBAT. Current. RSSI. Airspeed)

  • 2x PINIO

  • 2x SH1.0_8pin connector for 4in1 ESC

  • 1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)

  • 3x LEDs for FC STATUS (Blue. Green) and 3.3V indicator(Red)

  • 9~16V(Vxs) output ON/OFF switchable

  • Dual analog camera signal switchable

Power

  • Input: 9~60V (3~12S LiPo)

  • BEC: 5V 1.5A

  • BEC: Vx.  9~16V/1~2A (3S IN/9V 2A. 4S IN/12V 2A. 6S IN/16V 2A. 8S IN/16V 1.5A. 12S IN/16V 1A)

  • Battery Voltage Sensor: 1K:20K (INAV scale 2100. BF scale 210)

  • No Current Sensor built-in. supports external current sensor of PDB/4in1

Firmware

  • ArduPilot: MatekF405-TE

  • INAV: MATEKF405TE

  • BetaFlight: MATEKF405TE

Physical

  • Mounting: 30.5 x 30.5mm. Φ4mm with Grommets Φ3mm

  • Dimensions: 36 x 36 x 9 mm

  • Weight: 7g

Including

  • 1x FC F405-HDTE

  • 6x Silicon grommets M4 to M3

  • 1x SH1.0_8pin cable 5cm.  2x SH1.0_8pin connectors

  • 1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista & Air Unit)

the voltage is also supplied when connecting via USB 313: LDO3.3V Max.2

onboard BEC 5V. Voltage-Vx Vxs ON/OFF can be switched via ArduPilot Relay or Modes/USER1 (BFIINAV) DJI SBUS 4V5: 4.44.8V. Max. 80OmA. the voltage is also supplied when connecting via USB 313: LDO3.3V Max.2OOmA .

8motors+3servos in INAV/BF multirotor mixerif 2x 4in1 are powered by different batteries DO NOT connect different batteries voltage to

JOIOW INAV MATEKF4OSTE BetaFlight ADC pin: can be remapped as current sense ADC M8 1 Ardu: BATT_CURR2_PIN 10 M7 (ArduPilot support Zx Current readout)

Reviews