TODAY DEAL SALE OFF 10%. END IN %-D day%!D %H:%M:%S. HURRY UP!!!

MATEK Mateksys FLIGHT CONTROLLER F405-VTOL

$159.02 $106.01
Add to Wishlist
Ask a Question
SKU: 1005004957850579
Availability: In Stock Pre order Out of stock
Categories: Flight Controller
Description

MATEK Mateksys  FLIGHT CONTROLLER F405-VTOL SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Recommend Age: 12+y.14+y.3-6y.6-12y.0-3y

Origin: Mainland China

Material: Composite Material

Brand Name: MATEKSYS

FLIGHT CONTROLLER F405-VTOL STM32F405RGT6. ICM42688P. SPL06. OSD. VTOL PDB. 6xUARTs. 12x PWM.1xI2

MATEKSYS Flight Controller F4O5-VTOL 6 15mm MCU SMATEK Mateksys FLIGHT CONTROLLER F405-VTOLTIPS F405-VTOL has INAV fw preloaded for QCMATEK Mateksys FLIGHTTIPS F405-VTOL has INAV fw preloaded for QCBEC SVI6V/7.2V for servos. Default is 5

FC Specifications

  • MCU: STM32F405RGT6. 168MHz . 1MB Flash

  • IMU: ICM42688-P

  • Baro: SPL06-001

  • OSD: AT7456E

  • Blackbox: MicroSD card slot

  • 6x UARTs.  1x Softserial_Tx option(INAV)

  • 12x PWM outputs

  • 1x I2C

  • 4x ADC (VBAT. Current. RSSI. Airspeed)

  • 1x spare PINIO

  • USB/Beep Extender with Type-C(USB2.0)

  • Built in inverter on UART2-RX for SBUS input

  • Switchable Dual Camera Input

FC Firmware

  • ArduPilot: MatekF405-TE

  • INAV: MATEKF405TE_SD (INAV 5.0 or newer)

PDB

  • Input voltage range: 6.8~30V (2~6S LiPo)

  • Sense resistor: 100A continuous. 220A peak

  • 5x ESC power pads. total 100A continuous

  • Support continuous load of up to 100A on ESC pad near the current sensor resistor

  • Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter

  • Battery Voltage divider 1K:20K (Scale 2100 in INAV.  BATT_VOLT_MULT 21.0 in ArduPilot)

  • Current Senor: 220A.  3.3V ADC  (Scale 150 in INAV.  66.7 A/V in ArduPilot)

BEC 5V output

  • Designed for Flight controller. Receiver. OSD. Camera. Buzzer. 2812 LED_Strip. Buzzer. GPS module. AirSpeed

  • Continuous current: 2 Amps

BEC 9V /12V output

  • Designed for Video Transmitter. Camera. Gimbal ect.

  • Continuous current: 2 Amps

  • 12V option with Jumper pad

  • for stable 9V/12V output. input voltage should > output voltage +1V

BEC Vx output

  • Designed for Servos

  • Voltage adjustable. 5V Default. 6V or 7.2V via jumper

  • Continuous current: 8 Amps.  10A Peak

  • for stable Vx output. input voltage should > Vx voltage +1V

BEC 3.3V output

  • Designed for Baro / Compass module and external 3.3V peripherals

  • Linear Regulator

  • Continuous current: 200mA

Physical

  • Mounting: 25 x 25mm-Φ2mm. 35 x 35mm- Φ4mm

  • Dimensions: 45 x 42 x 15mm

  • Weight: 25g  w/ USB/buzzer adapter

Including

  • 1x F405-VTOL

  • 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.

  • 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port

  • 1x Rubycon ZLH 35V 470uF capacitor

  • Dupont 2.54 pins  (Board is shipped unsoldered)

TIPS


  • F405-VTOL has INAV fw preloaded for QC

  • Target MATEKF405TE_SD is not listed in INAV configurator 4.x.x.  It is supported by INAV5.0 or newer

  • ArduPilot fw. set LOG_BACKEND_TYPE = 1 (File) for SD card logging


Reviews