MTF-01 MicoAir Optical Flow Lidar Sensor - Compatible with Ardupilot/PX4/INAV

MTF-01 MicoAir Optical Flow Lidar Sensor SPECIFICATIONS

Brand Name: micoair

Origin: Mainland China

Drones Accessories Type: GPS

Choice: yes

semi_Choice: yes

MTF-01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot. PX4 and INAV. It can be used directly after simple configuration without complicated development process.

MTF-01 features an integrated PMW3901 optical flow sensor and a high-performance TOF sensor. which can be used normally in outdoor sunlight environments.

Specification

Product Weight: 4.5g

Product Size: 29.3 * 17 * 15mm

Output Mode: UART

Output Frequency: 100Hz

TOF Range: 0.02-8m

Ranging Dead Zone: 2cm

Range Accuracy: 2%

Wavelength: 830-870nm

Ambient Light Immunity: 70K Lux illumination

Distance FOV: 6 °

Optical Flow FOV: 42 °

Ambient Light Demand of Optical Flow: >60Lux

Optical Flow Working Distance:>80mm

Power Consumption: 500mW

Operating Voltage: 4.0- 5.5V

Operating Temperature: - 10 ° C-60 °C

See more detail from our official website:

micoair.com/index.php/optical_range_sensor_mtf-01

USER MANUAL

(Download MicoAssistant from here)

github.com/micoair/MTF-01_USER_MANUAL

VIDEO

Setup Optic Flow&Lidar(MTF-01) For Ardupilot&PX4

www.youtube.com/watch?v=D-ooFHEtQoo

Setup Optic Flow&Lidar(MTF-01) For INAV6 To Make Drones Hover And Fly Indoors Better

www.youtube.com/watch?v=bEKm-PGRnks

PACKAGE LIST

MTF-01 module * 1

20cm SH1.0 4PIN cable * 1 (single connector)

15cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）

15cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4/5/6)

Optical Flow and Lidar Setup Tutorial for MTF-01 with Ardupilot/PX4/INAV. perfect for MF-01 users seeking a comprehensive guide to configuring and utilizing this advanced sensor.

Compatible with ArduPilot/PX4/INAV. the MTF-01 module supports multiple open-source flight control systems via various protocols. The default protocol is MAVLink_APM for seamless integration with ArduPilot. while other supported protocols include MSP. Mavlink_VL. and more. Users can freely switch between protocols using the Micoair Assistant software or modify them directly through a USB-to-TTL module. Simply specify your flight control firmware when ordering.

MTF-01 MicoAir Optical Flow Lidar Sensor specifications: Dimension - 29.3 x 24.3 mm. Version - V1.0. Grounding pin - GVRT 2.5mm. Connector type - SH1.0-4P. Operating voltage - 5V. Transmission - Rx Tx.

MicoAir Optical Flow Lidar Sensor Setup Guide for Ardupilot/PX4/INAV:1. Set output protocol to mav_apm_2.2. Connect module to flight controller (e.g.. Telemz).3. Configure SERIAL2 settings: baud rate = 115. protocol = 1.4. Set FLOW_TYPE to 5 and RNGFNDI_TYPE to 10.5. Define RNGFNDL_MIN_CM as 2 and RNGFNDI_MAX_CM as 800.6. Restart controllers; sensor data will update in Mission Planner.7. Switch flight mode to loiter. unlock. and takeoff.

Get started with MTF-01 Micooir: set output protocol to mav_px4. connect module to flight controller like TELEM2. configure settings for TELEM2 (102) and baud rate 115200. Restart controllers and monitor sensor data updates in QGC. including DISTANCE_SENSOR and OPTICAL_FLOW_RAD.

Configure vehicle orientation parameters with MTF-01 Micooir on INAV. ArduPilot/PX4. defaulting to compatible flight controllers.