5.8Ghz 48CH 2W VTX - Long Range FPV Wireless Viedo Transmitter and EWRF UVC OTG Receiver + CMOS 1200TVL 2.5mm FPV Camera
5.8Ghz 48CH 2W VTX SPECIFICATIONS
Brand Name: EWRF
Origin: Mainland China
Material: Composite Material
Recommend Age: 14+y
RC Parts & Accs: Receivers
For Vehicle Type: Airplanes
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: 5.8G FPV set
Remote Control Peripherals/Devices: Receivers
Tool Supplies: Battery
Model Number: EWRF suit
Four-wheel Drive Attributes: Assemblage
Zenchansi EWRF OTG receiver supports Type-C and Micro-USB connectivity. featuring a 2000mW VTX output and a 1200 TVL camera for enhanced video transmission.
The UVC receiver needs to meet the following conditions:
1: Android phone
2: The phone supports OTG function
3: Qualcomm full range of CPUs can support
4: Kirin 950CPU and higher CPU
5: MediaTek X20CPU and higher CPU
6: Apple phone is not supported
Suggested app name
Camera Fi
FPViewer
USB Web Camera
https://www.camerafi.com/
Button Function: Long press to search for channels. short press to switch between them. USB Interface: Supports external display connectivity. Audio Output: White - audio output. Video Output: Yellow - video feed. Power Indicator: Red - power status. Ground: Black - GND connection.
API Interface: The EWRF receiver now supports advanced features suitable for use with an AV monitor (AV-IN) and compatible with a 7.27mm display resolution.
Computer Screen Effect: Enhances your display with features including Keystone (F). Zoom (D). Magnification (O). and Brightness Adjustment (H). Supports resolutions up to 3824x227 GB. with options for 4:3 or 16:9 aspect ratios.
No Single RXC (RC Search) Signal: If you receive no single C5 S885N signal. please check your channel settings. The recommended frequency is 5.8 GHz. with 70 channels available. For more information. refer to the MEEER technical specifications document. Please note that the default setting is Channel 5 (5885 MHz). with 10 channels available in the RUJT (Rutledge) mode.
Description :
Item Name : 1200TVL Mini Camera
Size : 22mm x 22mm
Format : PAL Optional
PAL: 976H×582V
NTSC: 976H×494V
Horizontal Resolution : 1000TVL
Video Output : 1.0Vp p/75ohm
AGC : 0.25/0.50/0.75/1.00 4 levels adjustable. up to max. 55dB
WB : ON/OFF
Exposure Type: electronic exposure
Electronic Shutter : 1/50(1/60) 1/100000 second
Gamma Correction : 0.45/1.0
Synchronization Mode : inter sync
Lens : 2.5mm 130degree/2.8mm 120degree optional
Specification :
Working Voltage : DC5 to 12V(wide voltage . measured 5 to 13V)
Working Current : 70mA(ow power consumption)
Working Temp. : -20degree to 60degree
Wetness: 0% ~ 98%
Important Note for 3-Pin Interface: To adjust PWM signal parameters. connect the yellow and black wires. Then. you can modify these settings in the receiver's BF mode. The connections are as follows: Red - SV output. Black - GND. White - 6-36V input.
The blue LED indicates the state of PIT mode or the value of the item when the VTX is enabled. When both the red and blue LEDs are on. PIT mode is active: Use two short presses to turn the transmitting (PIT MODE) on/off. Then. the Red and Green LEDs will blink.
The difference between the two PWM widths should be greater than 500µs. Use the remote control's two-speed toggle switch to adjust the parameters. The LED display will match the parameter settings displayed on the buttons.
| Color |
2w vtx suit |
|---|