RUSHFPV RUSH BLADE V2 Stack - F722 Analog Digital Flight Controller + Extreme 60A 128K BLHELI32 4in1 ESC for FPV Drone

RUSHFPV RUSH Blade V2 Stack. featuring an F722 Analog-Digital Flight Controller. combined with Extreme 60A 128K BLHELI32 4in1 ESC for FPV drones. includes a high-definition UART HD-Unit LED display and analog VTX/Radio Control digital definition.

RUSHFPV RUSH BLADE V2 Stack features an F722 analog digital flight controller. Extreme 60A 128K BLHELI32 4in1 ESC. and offers advanced features like high-performance STM32F722RET6 MCU. ICM42688P gyroscope. OSD video. 16M black box logging. UART ports. 8PWM output ports. 2ADC ports. and I2C port. It supports up to 36V/3-6S LiPo battery voltage and has a weight of T1g (without cable).

Rush Blade V2 Stack includes F722 analog-digital flight controller. Extreme 60A 128K BLHELI32 ESC. and 4in1 mode for FPV drones.

Introducing the Rush Blade V2 Stack - F722 Analog Digital Flight Controller + Extreme 60A 128K BLHELI32 4in1 ESC for FPV Drone. Please read this user manual carefully before use. as incorrect operation may result in product damage. personal injury. or property loss. Use this product only in a legal and safe area. RushFPV is not liable for any damages caused by incorrect use. Ensure the battery. motor. and propeller are matched to the correct model according to ESC specifications. Incorrect setup can cause malfunction or damage due to overload. Soldering tools are required; improper soldering skills may cause damage. Adjust ESC settings and flight controller parameters carefully. as incorrect tuning can lead to high temperatures. desync. or damage. This manual is based on official BLHELI32 instructions and serves as a reference only; firmware updates may change features.

RUSH BLADE ESC Wiring Diagram: Use the attached I/O pin connector to connect the RUSH BLADE flight controller. Motor connections are standard. For safety. remove propellers when working on the drone. No throttle calibration required for DSHOT signal.Startup/Throttle Calibration: Follow normal startup process and throttle calibration procedure. Rampup Power can be set between 3% and 150%. Temperature Protection and Low RPM Power Protection can be enabled or disabled.Motor Direction can be set to forward. reverse. or bidirectional. Demag Compensation detects and prevents motor stalls caused by winding demagnetization. Motor Timing can be set between approximately 10 and 310 degrees. Maximum Acceleration can be set between 0.1%/ms and 25.5%/ms. Throttle Calibration Enable can be disabled.

RUSHFPV's RUSH BLADE V2 Stack features an F722 Analog Digital Flight Controller. paired with an Extreme 60A 128K BLHELI32 4in1 ESC for FPV drone applications. The unit has a processor speed of @48MHz (F3) or @168MHz (F4). with PWM frequency ranging from 24-48K to 24-96k to 24-128K. LED color options include blue. pink. and orange. Dimensions are 45*36.5x7.5mm. weighing approximately 16g. The ESC uses the same wiring diagram as RUSH BLADE 30*30mm ESCs. with a recommended connection using an attached 1Opin connector.

RushFPU V2 stack includes F722 analog-digital flight controller. Extreme 60A 128K BLHELI32 4in1 ESC for FPV drone with features like HD-UNIT LED and UART interface.

RUSHFPV Rush Blade V2 stack features an F722 analog digital flight controller. paired with an Extreme 60A 128K BLHELI32 4in1 ESC for FPV drone applications.

RUSHFPV RUSH BLADE V2 Stack: F722 Analog Digital Flight Controller + Extreme 60A 128K BLHELI32 4in1 ESC for FPV Drone. features UART. USB socket. and definition of R8A. Check USB socket for compatible devices.