XROCK 3DR Radio Telemetry Module - 10KM 500mW 915Mhz 433Mhz Air Ground Interchangeable for APM PIXHAWK Pixhack RC FPV Drone
Description
XROCK 3DR Radio Telemetry Module SPECIFICATIONS
Wheelbase: Screws
Upgrade Parts/Accessories: Adapter
Unit Type: Pack
Tool Supplies: Cutting
Technical parameters: Value 2
Size: AS DESCRIPTION
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 12+y
Recommend Age: 14+y
RC Parts & Accs: Connectors/Wiring
Quantity: 1 pcs
Package Weight: 0.14kg (0.31lb.)
Package Size: 10cm x 15cm x 10cm (3.94in x 5.91in x 3.94in)
Origin: Mainland China
Model Number: 3DR Radio Telemetry
Material: Composite Material
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
10KM XROCK 3DR Radio Telemetry Module 500mW 915Mhz 433Mhz Air Ground Interchangeable for APM PIXHAWK Pixhack RC Drone
Features:
- Air and Ground end is interchangeable
- Range: around 10000M
- Compatible with APM.PX4.PIXHAWK.PIXHACK.JIYI P2.JIYI P2 PRO
- Support:MissionPlanner.DroidPlanner.AndroPilot.PlayUAV
- 915Mhz
- Receive sensitivity: -110 dBm
- Transmite power: 100dBm(500mW)
- MAVLink protocol framing status documents
- Frequency modulation and Spread spektrum (FHSS)
- Self adaption to time duvision multiplexing
- Support LBT and AFA
- Could configure duty ratio
- Built-in error correcting code(up to 25% data bit error)
- Open source firmware
- AT command configure data transmission
- RT command remote control data transmission
- Based on HM-TRP wireless module. with Si1000 8051 micro controller and Si4432 wireless module
Dimensions:
55 x 25 x 13.5 mm (without antenna)
Electrical Data:
Supply Voltage: 5V DC (from USB or JST-GH)
Transmit Current: 110 mA at 20dBm
Receive Current: 55 mA
Serial Interface: 3.3 V UART
pairing steps
1. Power on the data transmission module. the green light flashes.
2. Press and hold the pairing button for 3 seconds. the red light flashes quickly to enter pairing mode. Pairing mode lasts 10 seconds.
3. Supply power to another data transmission module within 10 seconds. the green light is always on. indicating that the pairing is successful
1. Power on the data transmission module. the green light flashes.
2. Press and hold the pairing button for 3 seconds. the red light flashes quickly to enter pairing mode. Pairing mode lasts 10 seconds.
3. Supply power to another data transmission module within 10 seconds. the green light is always on. indicating that the pairing is successful
Packing Content:
- 1 x Telemetry Module for air
- 1 x Telemetry Module for Ground
- 2 x Folding Antenna
- 2 x 4-wire connector cable
- 1 x TYBE-C to TYBE-C Cable
XROCK 3DR Radio Telemetry Module - 10KM 500mW 915Mhz 433Mhz Air Ground Interchangeable for APM PIXHAWK Pixhack RC FPV Drone