Features:

1. The advanced 32-bit ARM CortexM4 high-performance processors. can run NuttX RTOS real-time operating system;

2. 14 PWM / servo output;

3. Bus interface (UART. I2C. SPI. CAN);

4. The integrated backup power and backup controller fails. the primary controller fails over to the backup control is safe;

5. Provide automatic and manual modes;

6. Provide redundant power input and failover;

7. Multicolor LED lights;

8. Provide multi-tone buzzer Interface

9. Micro SD recording flight data;

Specifications:

Microprocessor

1.32 2 MB flash STM32F427 Cortex M4. with hardware floating-point processing unit

2. frequency: 168MHZ. 256K RAM

3.32 STM32F103 backup coprocessor

Sensor

1.L3GD20 3-axis digital gyroscope 16

2.LSM303D 3-axis accelerometer 14 / Magnetometer

3.MPU6000 6-axis accelerometer / magnetometer

4.MS5607 precision barometer

Interface

1 .5 high voltage compatible UART 1. 2 with hardware flow control

2. 2 CAN

3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input

4.Futaba SBUS compatible inputs and outputs

5.PPM Signal Input

6.RSSI (PWM or voltage) Input

7.I2C

8.SPI

9.3.3 and 6.6VADC input

10. External MICRO USB Interface

5010 750kv Motor :

Description:

These are really great outrunners. We've tested this line and they work extremely well.

This is 5010-750kv  Brushless Motor

Features:

1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.

2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.

3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.

4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.

5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this motor 5010.

6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.

7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .

Motor size: 50*10mm

Shaft size: 4mm

Weight: 80g

KV(rpm/v): 360/750

Battery: 2-6Li-Po

ESC: 20-40A

Best working with props of 14-16"

Aerial video://v.ku6.com/show/ga7IrggXzA9ew-NVGV20pQ...html?st=1_9_2_1&nr=1

 

Specification:
Brand:Hobbywing
Model Number:XRotor-40A
Cont.Current:40A
Burst Current(10sec):60A
BEC:None
Lipo:2-6S
Programming:Timing(high/middle)
Weight:26g
Size:68x25x8.7mm
Plug:Φ3.5mmx3
Usage:RC Multicopter
APAC means Asia-Pacific Version.the official ESC sold in Asia-Pacific areas.

 

NOTE : The new version of ZD550 . mainboard is like this.

Note ：Due to shipping restrictions. will be shipped in 2 or 3 parcels .